Cascade Microphones Knuckle Head: Copper Body & Grille

First day rental cost:
$25.00
Brief description:
Ribbon Microphone

For quantities and availability call 212-691-5544
Or email info@dreamhire.com

If you need this item within the next 2 days, please call immediately to guarantee availability.

The Knuckle Head is a passive ribbon microphone that combines the acoustic components of the successful Fat Head ribbon with a shockmounted headbasket design reminiscent of early broadcast microphones.

The ribbon motor uses Neodymium magnets surrounding a 2.2-micron corrugated aluminum ribbon measuring 5mm x 45mm. The ribbon is mounted symmetrically within the magnetic gap, *the front and back of the mic will produce the same sound.

The ribbon motor and headbasket are suspended within a 6-inch diameter metal hoop by eight springs. The output transformer is located within the cylindrical shaft below the shockmount hoop.

Specifications

  • Type: Ribbon (velocity) Microphone
  • Ribbon type & Dimensions: 99% Pure aluminum, 2.2 micron, 1 3/4" (L) X 3/16" (W)
  • Polar pattern: Figure 8 Symmetrical design
  • Sensitivity: -56 db +/- 2 dB (0 dB=1V/Pa)
  • Frequency response: Coming soon
  • Output Impedance: <=200 Ohms
  • Recommended load impedance: >1000 Ohms
  • Max.SPL (1% THD @1000 Hz): 135 dB
  • Connector: 3-Pin male XLR
  • Size: Diameter: O.D. grill:3", O.D. ring:6", O.D. body:1", Overall length:10"
  • Subject to availability
  • Rental rates are subject to change
Cascade Microphone Knuckle Head Ribbon microphone copperCascade Microphone Knuckle Head Ribbon microphone copper